First step:make sure the camera connect the router with the cable,and with the power on,the camera and your PC in the same LAN. Finished connection,after the camera run by itself,please check the lights that locate at the side of LAN port,if one is blinking, one is bright, it’s normal.
Second step: turn off the firewall and antivirus program as well as adjust the security to low.then open the search ip tool, choose the advance mode,searching camera ip.normally you can find the camera ip.
Note: http port equal to camera port
Let’s do it step by step,please install the ip camera search tool at first,you can download this tool from EasyN website,interface like this:
When you search the camera’s ip and port, you can open the inner access address via IE browser,
You can choose language,then log in this interface(158W camera as a example):
